YN27A machine
- YN27 hand hold internal-combustion rock drill is a hand-rock drilling tool which integrates the small gasoline-engine,compressor and rock drill.
- It can blow off the rock powder in the blasthole by the compressing air generatedfrom itself.
- Just 27kg weight for the main engine . Easy to carry about.Applicable for the areas of high mountains and of without power and wind pressure equipment,especially for those temporary projects with frequent movement.
Applications:
1. Applicable for rock drilling and breaking.Widely used in the earth and stone work of national defense,mining,road-construction,city construction and quarrying,etc.
|
Technical specifications |
|
|
Weight of the main engine |
27kg |
|
Type of carburetor |
Non carburetor float |
|
Ignition system |
Contactless |
|
Exhaustion |
185cm3 |
|
Rotating speed of engine with load (measured in five holes drilling) |
≥2450r/min |
|
Idling rotating speed of drill rods |
≥250r/min |
|
End of tool shank hex |
22*108mm |
|
Shock energy |
≥25J |
|
Max. elevation angle of drilling |
45° |
|
Max. drilling depth |
≥6m |
|
Tank volume |
≥1.1L |
|
Oil consumption(in five holes drilling) |
≤0.12L/m |
|
lubrication |
Automaticly lubricated with gasoline and engine oil |
|
Mixing proportion of gas and lubrication(by capacity) |
9:1 |
|
spark plug electrode gap |
|